Solar Hybrid Inverter 3 Phase

PHASE3 Phase
DISPLAY32 bit DSP based design
MODEMulti modes working SBG/SGB/Export/Batteryless
POWER FACTORIGBT rectifier with PF >0.9
DESIGNCustomized MPPT design
INDICATIONInteractive front LCD to do all settings via display
CONTROLMODBUS control for handshaking
REDUNDANCYParalleling option
MONITORINGRemote monitoring using GSM/RS-485



Grid Voltage Sync Range330V to 450V (±5V)
Grid Frequency Sync Range50Hz ± 6%
Charger Peak EfficiencyHigher than 90%
Max Grid Import Power CapacityDouble of Inverter capacity dependent on battery charging current
Max Batt Amp (Charging)5A to 200A selectable
Self ConsumptionLower than 4%
Recommended DG/GRID CapacityDouble of Inverter Capacity
Charge Controller TypeMPPT
Charger TopologyBUCK
No of MPPT Channels1
Max Battery Amps during PV chargingFull Capacity in Boost Mode / Current Control in Float Mode as per Battery AH
Battery type SupportedLMLA, VRLA, SMF, Ni-Cd: Charging Profile can be configured as per the battery requirement
Peak Charging EfficiencyHigher than 94% Up to 98%
No of Phases/Connection Type3Ph , 4 Wire- RYBN
Nominal Output Voltage400V AC ±2%
Output Frequency50Hz ± 0.5%
Voltage Regulation(Stand Alone)±2%
Frequency Regulation(Stand Alone)±0.5Hz
THDTHD less than 4%
OUTPUT WaveformPure Sine Wave
Galvanic IsolationIn built Isolation Transformer at Inverter Output
Output Power Factor0.8lagging
Peak Efficiency (Full Load)Higher than 75%
Overload capacity125% FOR 60 SEC, 150% FOR 5 SEC / Can be customized
DG CompatibilityAvailable
Auto Bypass featureAvailable
Grid Export ModeAvailable, Enable/Disable Options available
Anti Islanding FunctionAvailable, In Compliance with IEC 62116
Compatible IEC standardsIEC -61683:1999- As per MNRE Requirement
LEDGrid On, PV On, Grid Charger On, Load On Grid, Load On Battery , Fault
LCD Display ParametersINPUT GRP | Voltage | Current | Frequency
Modes Available5: SBG, SGB, GSB, GFM, INV
Battery Buffer SettingSelectable from 25%,50%,75%
MPPT Modes2